Skip to content
Using Android in Industrial Automation

Using Android in Industrial Automation

Technical Blog of Nexus-Computing GmbH Switzerland

Category: AOSP

Posted on December 8, 2016September 25, 2019

Building and Deploying Android AOSP 6.01 for the Wandboard

While our guide of how to build deploy vanilla AOSP on the Wandboard has helped many to understand more about the Android and Linux build tools, it is often required for applications to have hardware graphics acceleration.

Continue reading “Building and Deploying Android AOSP 6.01 for the Wandboard”

Nexus-Computing GmbH

Looking for professional Android development?
Visit
Nexus-Computing
for more.

Categories

Recent Posts

  • High Idle Power Consumption on the NRF9160 DK using Blinky on Zephyr (~ 520 uA)
  • Setting up Android Studio with Cloud Endpoints Frameworks (Cloud Endpoints v2.0)
  • Android 6 Marshmallow over Network File System (NFS) on the Wandboard
  • Building and Deploying Android AOSP 6.01 for the Wandboard
  • Updated guide to Android Unit Testing
  • Building and Deploying Vanilla/AOSP Android 4.4.4 for the Wandboard
  • Building and Deploying the Mainline (Vanilla) Android Master Source for the Beaglebone Black
  • Build and deploy Yocto Linux on the Beaglebone Black
  • Cross compiling Android’s adb and fastboot for embedded Linux (e.g. Yocto/OpenEmbedded)
  • Turn your (Linux-) Desktop / Arduino Yún / Raspberry Pi into an USB Android Accessory: How to use the Android Accessory Protocol with pyusb
  • Home Automation with Android and Arduino Yún
  • Working with GPIO on the Wandboard and Writing an Android Driver for GPIO Interrupts
  • How to get started with Embedded Android on the Wandboard: Building and Deploying the Bootloader, Kernel and Android Root File System
  • Embedded Android Tutorial: Part II, Setting up the Arduino to measure light intensity and reconfigure the Pandaboard’s kernel for communication
  • Embedded Android Tutorial: Part I, Setting up the Pandaboard with the Linaro Android Build

Recent Comments

  • Danielle Honigstein on Android USB Host + Arduino: How to communicate without rooting your Android Tablet or Phone
  • Danielle Honigstein on Android USB Host + Arduino: How to communicate without rooting your Android Tablet or Phone
  • Luo on Cross compiling Android’s adb and fastboot for embedded Linux (e.g. Yocto/OpenEmbedded)
  • Rahul on Turn your (Linux-) Desktop / Arduino Yún / Raspberry Pi into an USB Android Accessory: How to use the Android Accessory Protocol with pyusb
  • dimas on Turn your (Linux-) Desktop / Arduino Yún / Raspberry Pi into an USB Android Accessory: How to use the Android Accessory Protocol with pyusb
Proudly powered by WordPress